PATTERN BIBI SEWING KIT PDF
Introducing Bibi, the adorable little collar to slip under all your sweaters and tops in winter, or wear on its own in summer over a bra (or not). It brings a touch of color close to the face, and its collar points, a little tartan but not too tartan, give a retro wink to your outfits. You can play with the tie and button details to make it unique, and because it's small, it's very economical on fabric.
Extend the experience by sharing your tips and achievements on Instagram! #MakeMyLemonade #LemonadeCoutureClub
The measurements shown on the chart are for the garment when flat. For sizing advice, please refer to the product description.
#Size tip: as with a shirt, measure your neck size.
|
Bibi removable collar |
Size 1 |
Size 2 |
|
Longueur / Length (cm) |
39,5 |
43,5 |
|
Neckline(cm) |
35 |
38 |
The pattern is graded for 2 sizes: 1 and 2. As always, sewing values are already included ;)
To make Bibi you will need :
-0.8m of fabric in 1.40m width or 1m in 1.10m width,
-3 10mm diameter buttons
-fusible webbing for the collar if your fabric is too soft
This pattern includes sewing values. They are 1cm unless otherwise indicated. You can make this pattern with a different collar material, so you can use your fabric scraps. Patterns lend themselves beautifully, but a set of two-tone fabrics is also an option, or if you want a preppy feel, take a simple white cotton poplin or white broderie anglaise.
Download
To download your pattern , log in and go to the pattern PDF page. You can find the patterns PDFs you have ordered in your customer area.
Please note: you can only download 5 files per model. We recommend that you save your file on your computer or in the cloud, so as not to lose it.
Formats and printing
All patterns products are available in A4/US letter format.
Newer models are also available in A0 (we are gradually adding older models).
To print in A4/US letter, you need your own printer or a printer's specialist. To print in A0, you need a printer.
Assembly
For A4/US letter format. The printed area is smaller than the page. We advise you to print the first page, making sure that the test square is the right size.
Please note that your printer settings must be set to "no scaling" or "print 100%". After printing, you can trim the margins and tape the sheets together. See further instructions here.