TWIST PATTERN DE COUTURE GINETTE

Difficulty :
€7,90

Introducing Ginette, a blouse that's either very classic or very extravagant, depending on the fabric you choose. Slightly fitted at the bust with diamond-shaped darts, it leaves plenty of room at the bust and hips. Its slightly sailor collar can be adorned with a ribbon or braid. For added comfort, the cuffs are elasticated.

Extend the experience by sharing your tips and achievements on Instagram! #MakeMyLemonade #LemonadeCoutureClub

Sizing guide
Details

Introducing Ginette, a blouse that's either very classic or very extravagant, depending on the fabric you choose. Slightly fitted at the bust with diamond-shaped darts, it leaves plenty of room at the bust and hips. Its slightly sailor collar can be adorned with a ribbon or braid. For added comfort, the cuffs are elasticated.

Advice pattern

To make Ginette you will need :
-2m70 of 140cm-wide fabric or 3m30 of 110cm-wide fabric,
a little iron-on,
-7 small 15mm diameter buttons,
- 2m30 of 10mm wide ribbon,
-50 cm of 1.5/2cm wide elastic.

This pattern includes sewing values. They are 1cm unless otherwise indicated. For this model, we recommend a fabric with a little hold for a clean fall. A crisp cotton poplin, a slightly thick viscose or why not a métis (linen and cotton blend). A slightly thick polyester or silk satin can also give a beautiful result.


PDF info

Download
To download your pattern , log in and go to the pattern PDF page. You can find the patterns PDFs you have ordered in your customer area.
Please note: you can only download 5 files per model. We recommend that you save your file on your computer or in the cloud, so as not to lose it.

Formats and printing
All patterns products are available in A4/US letter format.
Newer models are also available in A0 (we are gradually adding older models).
To print in A4/US letter, you need your own printer or a printer's specialist. To print in A0, you need a printer.

Assembly
For A4/US letter format. The printed area is smaller than the page. We advise you to print the first page, making sure that the test square is the right size.
Please note that your printer settings must be set to "no scaling" or "print 100%". After printing, you can trim the margins and tape the sheets together. See further instructions here.