PATTERN DE COUTURE CLEO PDF
We recommend a fluid fabric to prevent the sleeves from bulging too much. A poplin from viscose, satin, fine crepe or twill would be perfect. If you're looking for a romantic, flowery inspiration, choose an broderie anglaise. Don't hesitate to play with the number of buttons, as they'll make all the difference! Take them small like jewels or very large or even covered!
Extend the experience by sharing your tips and achievements on Instagram! #MakeMyLemonade #LemonadeCoutureClub
|
Cléo |
34 |
36 |
38 |
40 |
42 |
44 |
46 |
48 |
|
Poitrine / Chest (cm) |
80 |
84 |
88 |
92 |
96 |
100 |
104 |
198 |
|
Size / Waistline (cm) |
60 |
64 |
68 |
72 |
76 |
80 |
84 |
88 |
|
Hips (cm) |
86 |
90 |
94 |
98 |
102 |
106 |
110 |
114 |
The pattern is graded from 34 to 48! As always, sewing values are already included ;)
To make Cléo you will need:
- 1m90m of fabric for a width of 1.40m or 2m50m of fabric for a width of 1.10m
- 4 buttons, diameter 18mm
- 1 small 12mm button
We recommend a fluid fabric to prevent the sleeves from bulging too much. A poplin from viscose, satin, fine crepe or twill would be perfect. If you're looking for a romantic, flowery inspiration, choose an broderie anglaise. Don't hesitate to play with the number of buttons, as they'll make all the difference! Take them small like jewels or very large or even covered!
Download
To download your pattern , log in and go to the pattern PDF page. You can find the patterns PDFs you have ordered in your customer area.
Please note: you can only download 5 files per model. We recommend that you save your file on your computer or in the cloud, so as not to lose it.
Formats and printing
All patterns products are available in A4/US letter format.
Newer models are also available in A0 (we are gradually adding older models).
To print in A4/US letter, you need your own printer or a printer's specialist. To print in A0, you need a printer.
Assembly
For A4/US letter format. The printed area is smaller than the page. We advise you to print the first page, making sure that the test square is the right size.
Please note that your printer settings must be set to "no scaling" or "print 100%". After printing, you can trim the margins and tape the sheets together. See further instructions here.