PATTERN DE COUTURE HENDRIKS PDF
Here's Hendriks, the historic trench coat, revamped by us. The raglan sleeves are back, for optimum comfort no matter what sweater you're wearing underneath.
The bottom flaps are also there, with a pretty godet movement that will structure your silhouette.
At the bottom of the sleeves, the knots to tighten make it unique and feminine. And because you'll never want to take it off, Hendriks is lined, so it can be worn so you can wear it all winter long!
The measurements shown on the chart are those of the garment. For sizing advice, please refer to the product description.
|
Hendriks coat |
34 |
36 |
38 |
40 |
42 |
44 |
46 |
48 |
|
Tour de poitrine / Bust (cm) |
105 |
109 |
113 |
117 |
121 |
125 |
129 |
133 |
|
Longueur totale / Total length (cm) |
101 |
102 |
103 |
104 |
105 |
106 |
107 |
108 |
|
Longueur manche / Sleeve length (cm) |
71.5 |
72 |
72.5 |
73 |
73.5 |
74 |
74,5 |
75 |
The pattern is graded from 34 to 48. The paper version is delivered in a kraft pouch, complete with explanatory booklet and label! As always, sewing values are already included ;)
This pattern includes seam values and they are 1cm. A thicker, stiffer material will give it the look of a large coat, perfectly suited to winter temperatures. A wool sheet, wool, velvet, tweed or faux fur would be perfect for this purpose.
For a lighter, more fluid mid-season jacket, we recommend a cotton canvas, crepe, gabardine or even a fine woollen fabric. You can choose not to double Hendriks. To do so, you'll need a pretty bias for the finish.
To make Hendriks, you'll need
- 4m55 of fabric in 1.40m width.
- 6m45 of fabric in 1.10m width
- 8 buttons
- 2m75 lining in 1.40m width
- 3m95 lining in 1.10m width
Download
To download your pattern , log in and go to the pattern PDF page. You can find the patterns PDFs you have ordered in your customer area.
Please note: you can only download 5 files per model. We recommend that you save your file on your computer or in the cloud, so as not to lose it.
Formats and printing
All patterns products are available in A4/US letter format.
Newer models are also available in A0 (we are gradually adding older models).
To print in A4/US letter, you need your own printer or a printer's specialist. To print in A0, you need a printer.
Assembly
For A4/US letter format. The printed area is smaller than the page. We advise you to print the first page, making sure that the test square is the right size.
Please note that your printer settings must be set to "no scaling" or "print 100%". After printing, you can trim the margins and tape the sheets together. See further instructions here.