PATTERN SEWING INSTRUCTIONS NINA SKIRT PDF
Introducing Nina, the fashionable, MOD mini skirt with a colorful wave at the front that underlines its vintage feel. With contrasting piping, it's a quick, easy-to-make piece that's sure to make an effortless impact! Simple in cut, it conceals an invisible side zip, and on the back there's a small pocket for essentials. Lined for year-round comfort.
Extend the experience by sharing your tips and creations on Instagram! #MakeMyLemonade #LemonadeCoutureClub
The measurements shown on the chart are calculated from the values of the garment when flat.
#Sizing advice: choose your usual skirt size. If in doubt, measure according to your waist size. If you're between sizes, take the next size up.
|
Nina skirt |
34 |
36 |
38 |
40 |
42 |
44 |
46 |
48 |
50 |
52 |
|
Tour de Taille / Waist (cm) |
66 |
70 |
74 |
78 |
82 |
86 |
90 |
96 |
102 |
108 |
|
Tour de hanches / Hips (cm) |
92 |
96 |
100 |
104 |
108 |
112 |
116 |
122 |
128 |
134 |
|
Tour de bas / Bottom (cm) |
104 |
108 |
112 |
116 |
120 |
124 |
128 |
134 |
140 |
146 |
|
Longueur de la jupe / Skirt length (cm) |
76 |
77 |
78 |
79 |
80 |
81 |
82 |
83 |
84 |
85 |
This pattern is graded from 34 to 52, seam values (1cm) are included.
Introducing Nina, the fashionable, MOD mini skirt with a colorful wave at the front that underlines its vintage feel. With contrasting piping, it's a quick, easy-to-make piece that's sure to make an effortless impact! Simple in cut, it conceals an invisible side zip, and on the back there's a small pocket for essentials. Lined for year-round comfort.
This pattern includes sewing values. They are 1cm unless otherwise indicated. We advise you to start with a fabric with a little hold, but not too thick, to avoid bulging at the wave cut. A suiting wool is a good choice for winter, but you can also opt for a light gabardine or fine denim.
Other recommendations include toile de Jouy, jacquard, flat velvet, ottoman or a slightly thick cotton/linen blend.
You'll need :
- 1m10 fabric in 140cm width or 1m30 in 110cm width,
- 1m lining in 140cm width or 1m in 110cm width,
- a little fusible webbing,
- 70cm of piping or bias,
- 1 invisible 22cm zip.
Download
To download your pattern , log in and go to the pattern PDF page. You can find the patterns PDFs you have ordered in your customer area.
Please note: you can only download 5 files per model. We recommend that you save your file on your computer or in the cloud, so as not to lose it.
Formats and printing
All patterns products are available in A4/US letter format.
Newer models are also available in A0 (we are gradually adding older models).
To print in A4/US letter, you need your own printer or a printer's specialist. To print in A0, you need a printer.
Assembly
For A4/US letter format. The printed area is smaller than the page. We advise you to print the first page, making sure that the test square is the right size.
Please note that your printer settings must be set to "no scaling" or "print 100%". After printing, you can trim the margins and tape the sheets together. See further instructions here.