PATTERN COUTURE KARLA EXCLU PDF
Introducing Karla, the dress that plays with transparency. Its straight cut and wide double sleeves keep it comfortable all day long. It's finished at the bottom with a wide, gathered knee-length flounce. Karla also comes with a knee-length bottom and adjustable straps!
Extend the experience by sharing your tips and creations on Instagram! #MakeMyLemonade #LemonadeCoutureClub
The measurements shown in the table are those of the garment flat.
#Size tip: Take your usual dress size.
|
Karla dress |
34 |
36 |
38 |
40 |
42 |
44 |
46 |
48 |
50 |
52 |
|
Tour de poitrine / Bust (cm) |
90 |
94 |
98 |
102 |
106 |
110 |
114 |
118 |
122 |
126 |
|
Tour de hanches/ Hips (cm) |
106 |
110 |
114 |
118 |
122 |
126 |
130 |
134 |
138 |
142 |
|
Longueur de la robe / Dress length (cm) |
132 |
133 |
134 |
135 |
136 |
137 |
138 |
139 |
140 |
141 |
|
Longueur de manche / Sleeve width (cm) |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
32 |
|
Fond de robe dessous de poitrine/ Underbust slip dress(cm) |
72 |
76 |
80 |
84 |
88 |
92 |
102 |
106 |
110 |
114 |
|
Longueur fond de robe / Slip dress length (cm) |
92 |
93 |
94 |
95 |
96 |
97 |
98 |
99 |
100 |
101 |
The pattern is graded from 34 to 52! As always, sewing values are already included ;)
To make the Karla dress and its base, you will need :
- 4m40 of 140cm wide fabric for the dress,
- 1m80 of 140cm fabric for the bottom of the dress,
- 1 pair of 11mm diameter sliders and buckles.
This pattern includes sewing values. They are 1cm unless otherwise indicated.
To keep the volume of the dress, we recommend a fabric with a little crunch that will make the ruffles swell. A silk or polyester organza will do the trick. Have fun with patterns, between polka dots, flowers and so on.
For the bottom of the dress, choose natural materials for summer (cotton or linen voile, cotton poplin...).
Download
To download your pattern , log in and go to the pattern PDF page. You can find the patterns PDFs you have ordered in your customer area.
Please note: you can only download 5 files per model. We recommend that you save your file on your computer or in the cloud, so as not to lose it.
Formats and printing
All patterns products are available in A4/US letter format.
Newer models are also available in A0 (we are gradually adding older models).
To print in A4/US letter, you need your own printer or a printer's specialist. To print in A0, you need a printer.
Assembly
For A4/US letter format. The printed area is smaller than the page. We advise you to print the first page, making sure that the test square is the right size.
Please note that your printer settings must be set to "no scaling" or "print 100%". After printing, you can trim the margins and tape the sheets together. See further instructions here.