PATTERN DE COUTURE HYPOLITE PDF
Introducing Hypolite, the bustier with a very haute couture spirit. Less complicated than it looks, it's decorated with a trompe l'oeil bow. Comfortable, it's stretchy in the back thanks to its smocked band, and practical to slip on as it hides a detachable zip on the side! We suggest you play around with this model, adding sleeves, a skirt, changing it into a dress - it can be an incredible base for your projects.
Extend the experience by sharing your tips and achievements on Instagram! #MakeMyLemonade #LemonadeCoutureClub
The measurements shown on the chart are calculated from the values of the garment when flat. This model is smocked at the back. The table shows the values for the unstretched and stretched flat top.
#Size tip: If you have a large bust, don't hesitate to check with the bust measurement.
|
Bustier Hypolite |
S |
M |
L |
XL |
|
Tour de poitrine/ Chest (cm) |
72,3 à 84 |
80,5 à 90 |
88,5 à 102 |
91,5 à 106 |
|
Waist/ Tour de taille (cm) |
67,5 à 82 |
72 à 87 |
81 à 98 |
86 à 100 |
|
Longueur totale bust / Total bust length (cm) |
21 |
21,5 |
24 |
25 |
Short bustier with trompe l'oeil bow. Satin material. Fully lined in satin. Hidden side zip fastening. Smocked back. Slightly waisted length.
To make Hypolite you will need :
-1m30 of 140cm wide fabric or 1m70 of 110cm wide fabric,
a little iron-on,
a 30cm-long detachable zip.
This pattern includes sewing values. They are 1cm unless otherwise indicated. For the choice of fabric, we advise you to start with an extraordinary fabric: duchesse satin, damask, brocade, tapestry, organza, lurex, lamé, velvet - in short, indulge yourself!
Download
To download your pattern , log in and go to the pattern PDF page. You can find the patterns PDFs you have ordered in your customer area.
Please note: you can only download 5 files per model. We recommend that you save your file on your computer or in the cloud, so as not to lose it.
Formats and printing
All patterns products are available in A4/US letter format.
Newer models are also available in A0 (we are gradually adding older models).
To print in A4/US letter, you need your own printer or a printer's specialist. To print in A0, you need a printer.
Assembly
For A4/US letter format. The printed area is smaller than the page. We advise you to print the first page, making sure that the test square is the right size.
Please note that your printer settings must be set to "no scaling" or "print 100%". After printing, you can trim the margins and tape the sheets together. See further instructions here.