PATTERN DE COUTURE JENNA EXCLU PDF
Introducing Jenna, the head-turning ruffled dress. Its 5 ruffles and twirling sleeves give it a very light look. The rounded, bias-finish neckline is wide enough to slip on easily, and with its above-the-knee length, it'll show off your legs. Be warned, though, that patience will be your best ally, as you'll need to gather up all those little ruffles!
Extend the experience by sharing your tips and achievements on Instagram! #MakeMyLemonade #LemonadeCoutureClub
The measurements shown on the chart are for the garment when flat.
#Sizing advice: Take your usual dress size.
|
Jenna dress |
34 |
36 |
38 |
40 |
42 |
44 |
46 |
48 |
50 |
52 |
|
Tour de poitrine / Bust (cm) |
98 |
102 |
106 |
110 |
114 |
118 |
122 |
128 |
134 |
140 |
|
Tour du bas de vêtement / Hem circumference (cm) |
112 |
116 |
120 |
124 |
128 |
132 |
136 |
142 |
148 |
154 |
|
Longueur manche / Sleeve length (cm) |
41,5 |
42 |
42,5 |
43 |
43,5 |
44 |
44,5 |
45 |
45,5 |
46 |
|
Longueur de robe/ Dress length (cm) |
87 |
88 |
89 |
90 |
91 |
92 |
93 |
94 |
95 |
96 |
Introducing Jenna, the head-turning ruffled dress. Its 5 ruffles and twirling sleeves give it a very light look. The rounded, bias-finish neckline is wide enough to slip on easily, and with its above-the-knee length, it'll show off your legs. Be warned, though, that patience will be your best ally, as you'll need to gather up all those little ruffles!
You will need :
-3m fabric in 140cm width,
-1m10 lining in 140cm width or 1m40 if your fabric is transparent,
-80cm bias.
This pattern includes sewing values. To soften the festive side of the dress, opt for chiffon, satin crepe or polyester voile. If, on the other hand, you want to shine on the dance floor, don't hesitate to choose organza, lamé fabric or iridescent polyester crepe. If you're lucky enough to find a micro-pleated fabric, it'll look great too.
Download
To download your pattern , log in and go to the pattern PDF page. You can find the patterns PDFs you have ordered in your customer area.
Please note: you can only download 5 files per model. We recommend that you save your file on your computer or in the cloud, so as not to lose it.
Formats and printing
All patterns products are available in A4/US letter format.
Newer models are also available in A0 (we are gradually adding older models).
To print in A4/US letter, you need your own printer or a printer's specialist. To print in A0, you need a printer.
Assembly
For A4/US letter format. The printed area is smaller than the page. We advise you to print the first page, making sure that the test square is the right size.
Please note that your printer settings must be set to "no scaling" or "print 100%". After printing, you can trim the margins and tape the sheets together. See further instructions here.